The low-profile version of our infamous Original tremolo, the 1000 Series Pro features the same string spacing as the Floyd Rose Original (.420") whereas the German Pro has a narrower spacing. Available in a variety of nut sizes that will fit practically any electric guitar, the tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The low-profile version of our infamous Original tremolo, the 1000 Series Pro features the same string spacing as the Floyd Rose Original (.420") whereas the German Pro has a narrower spacing. Available in a variety of nut sizes that will fit practically any electric guitar, the tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The low-profile version of our infamous Original tremolo, the 1000 Series Pro features the same string spacing as the Floyd Rose Original (.420") whereas the German Pro has a narrower spacing. Available in a variety of nut sizes that will fit practically any electric guitar, the tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The low-profile version of our infamous Original tremolo, the 1000 Series Pro features the same string spacing as the Floyd Rose Original (.420") whereas the German Pro has a narrower spacing. Available in a variety of nut sizes that will fit practically any electric guitar, the tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

Narrow 2 1/16" (modern) string spacing. Fits Strat® Style Guitars with 6 Point Bridges*. (*Also fits 2 point bridge guitars with some drilling) The Rail Tail Tremolo is a full contact, dive-only tremolo designed to retrofit your existing Strat®-style 6-point tremolo with no modifications to your guitar; a clever design merging the feel and reliability of a hardtail bridge with the flexibility of a tremolo system. Computer designed and precision-machined, the Rail Tail achieves maximum performance and stunning appearance without compromising comfort or feel. Its unique features allow for adjustability to fit a variety of guitar bodies and for an easy DIY installation. Unlike the original tremolo design that rocks on a bevel located under the screw heads, the Rail Tail tremolo plate rotates around a precision rail that is mounted directly to the guitar body. The plate cradles the entire rail with precision as if they were one unit improving sound quality and tuning stability. This union also creates a greater breakpoint allowing open strings to maintain pitch when bending another, much like a hardtail. The tremolo plate consists of slotted string block mounting holes not only for accommodating installation but also allowing the string block to be positioned forward for greater rotational range. This means diving up to 15 degrees more than conventional tremolo bridges. An advanced string block also consists of game-changing features: Mid-positioned tapered string holes assist in true string saddle contact. Working in alliance with the rail and string block are the roller fitted string saddles. This entire assembly provides ultimate vibrational energy transfer from the strings to the guitar body resulting in better overall sustain and tonal qualities. Available in narrow (modern, 2-1/16") and wide (vintage, (2-7/32") models in Chrome, Black, Gold, Nickel and Black Nickel finishes. Please note: The Rail mounting holes are universal meaning that a narrow spaced Rail Tail will fit onto a wide spaced guitar body and vice versa. (For optimum performance, playing experience and reliability, it's highly recommend that the guitar this unit is being installed on, is equipped with locking tuners and a quality nut.)

Read more less

Narrow 2 1/16" (modern) string spacing. Fits Strat® Style Guitars with 6 Point Bridges*. (*Also fits 2 point bridge guitars with some drilling) The Rail Tail Tremolo is a full contact, dive-only tremolo designed to retrofit your existing Strat®-style 6-point tremolo with no modifications to your guitar; a clever design merging the feel and reliability of a hardtail bridge with the flexibility of a tremolo system. Computer designed and precision-machined, the Rail Tail achieves maximum performance and stunning appearance without compromising comfort or feel. Its unique features allow for adjustability to fit a variety of guitar bodies and for an easy DIY installation. Unlike the original tremolo design that rocks on a bevel located under the screw heads, the Rail Tail tremolo plate rotates around a precision rail that is mounted directly to the guitar body. The plate cradles the entire rail with precision as if they were one unit improving sound quality and tuning stability. This union also creates a greater breakpoint allowing open strings to maintain pitch when bending another, much like a hardtail. The tremolo plate consists of slotted string block mounting holes not only for accommodating installation but also allowing the string block to be positioned forward for greater rotational range. This means diving up to 15 degrees more than conventional tremolo bridges. An advanced string block also consists of game-changing features: Mid-positioned tapered string holes assist in true string saddle contact. Working in alliance with the rail and string block are the roller fitted string saddles. This entire assembly provides ultimate vibrational energy transfer from the strings to the guitar body resulting in better overall sustain and tonal qualities. Available in narrow (modern, 2-1/16") and wide (vintage, (2-7/32") models in Chrome, Black, Gold, Nickel and Black Nickel finishes. Please note: The Rail mounting holes are universal meaning that a narrow spaced Rail Tail will fit onto a wide spaced guitar body and vice versa. (For optimum performance, playing experience and reliability, it's highly recommend that the guitar this unit is being installed on, is equipped with locking tuners and a quality nut.)

Read more less

Narrow 2 1/16" (modern) string spacing. Fits Strat® Style Guitars with 6 Point Bridges*. (*Also fits 2 point bridge guitars with some drilling) The Rail Tail Tremolo is a full contact, dive-only tremolo designed to retrofit your existing Strat®-style 6-point tremolo with no modifications to your guitar; a clever design merging the feel and reliability of a hardtail bridge with the flexibility of a tremolo system. Computer designed and precision-machined, the Rail Tail achieves maximum performance and stunning appearance without compromising comfort or feel. Its unique features allow for adjustability to fit a variety of guitar bodies and for an easy DIY installation. Unlike the original tremolo design that rocks on a bevel located under the screw heads, the Rail Tail tremolo plate rotates around a precision rail that is mounted directly to the guitar body. The plate cradles the entire rail with precision as if they were one unit improving sound quality and tuning stability. This union also creates a greater breakpoint allowing open strings to maintain pitch when bending another, much like a hardtail. The tremolo plate consists of slotted string block mounting holes not only for accommodating installation but also allowing the string block to be positioned forward for greater rotational range. This means diving up to 15 degrees more than conventional tremolo bridges. An advanced string block also consists of game-changing features: Mid-positioned tapered string holes assist in true string saddle contact. Working in alliance with the rail and string block are the roller fitted string saddles. This entire assembly provides ultimate vibrational energy transfer from the strings to the guitar body resulting in better overall sustain and tonal qualities. Available in narrow (modern, 2-1/16") and wide (vintage, (2-7/32") models in Chrome, Black, Gold, Nickel and Black Nickel finishes. Please note: The Rail mounting holes are universal meaning that a narrow spaced Rail Tail will fit onto a wide spaced guitar body and vice versa. (For optimum performance, playing experience and reliability, it's highly recommend that the guitar this unit is being installed on, is equipped with locking tuners and a quality nut.)

Read more less

Wide 2 7/32" (vintage) string spacing. Fits Strat Style Guitars with 6 Point Bridges*.(*Also fits 2 point bridge guitars with some drilling)The Rail Tail Tremolo is a full contact, dive-only tremolo designed to retrofit your existing Strat®-style 6-point tremolo with no modifications to your guitar; a clever design merging the feel and reliability of a hardtail bridge with the flexibility of a tremolo system. Computer designed and precision-machined, the Rail Tail achieves maximum performance and stunning appearance without compromising comfort or feel. Its unique features allow for adjustability to fit a variety of guitar bodies and for an easy DIY installation. Unlike the original tremolo design that rocks on a bevel located under the screw heads, the Rail Tail tremolo plate rotates around a precision rail that is mounted directly to the guitar body. The plate cradles the entire rail with precision as if they were one unit improving sound quality and tuning stability. This union also creates a greater breakpoint allowing open strings to maintain pitch when bending another, much like a hardtail. The tremolo plate consists of slotted string block mounting holes not only for accommodating installation but also allowing the string block to be positioned forward for greater rotational range. This means diving up to 15 degrees more than conventional tremolo bridges. An advanced string block also consists of game-changing features: Mid-positioned tapered string holes assist in true string saddle contact. Working in alliance with the rail and string block are the roller fitted string saddles. This entire assembly provides ultimate vibrational energy transfer from the strings to the guitar body resulting in better overall sustain and tonal qualities. Available in narrow (modern, 2-1/16") and wide (vintage, (2-7/32") models in Chrome, Black, Gold, Nickel and Black Nickel finishes. Please note: The Rail mounting holes are universal meaning that a narrow spaced Rail Tail will fit onto a wide spaced guitar body and vice versa. (For optimum performance, playing experience and reliability, it's highly recommend that the guitar this unit is being installed on, is equipped with locking tuners and a quality nut.)

Read more less

Wide 2 7/32" (vintage) string spacing. Fits Strat Style Guitars with 6 Point Bridges*.(*Also fits 2 point bridge guitars with some drilling)The Rail Tail Tremolo is a full contact, dive-only tremolo designed to retrofit your existing Strat®-style 6-point tremolo with no modifications to your guitar; a clever design merging the feel and reliability of a hardtail bridge with the flexibility of a tremolo system. Computer designed and precision-machined, the Rail Tail achieves maximum performance and stunning appearance without compromising comfort or feel. Its unique features allow for adjustability to fit a variety of guitar bodies and for an easy DIY installation. Unlike the original tremolo design that rocks on a bevel located under the screw heads, the Rail Tail tremolo plate rotates around a precision rail that is mounted directly to the guitar body. The plate cradles the entire rail with precision as if they were one unit improving sound quality and tuning stability. This union also creates a greater breakpoint allowing open strings to maintain pitch when bending another, much like a hardtail. The tremolo plate consists of slotted string block mounting holes not only for accommodating installation but also allowing the string block to be positioned forward for greater rotational range. This means diving up to 15 degrees more than conventional tremolo bridges. An advanced string block also consists of game-changing features: Mid-positioned tapered string holes assist in true string saddle contact. Working in alliance with the rail and string block are the roller fitted string saddles. This entire assembly provides ultimate vibrational energy transfer from the strings to the guitar body resulting in better overall sustain and tonal qualities. Available in narrow (modern, 2-1/16") and wide (vintage, (2-7/32") models in Chrome, Black, Gold, Nickel and Black Nickel finishes. Please note: The Rail mounting holes are universal meaning that a narrow spaced Rail Tail will fit onto a wide spaced guitar body and vice versa. (For optimum performance, playing experience and reliability, it'€™s highly recommend that the guitar this unit is being installed on, is equipped with locking tuners and a quality nut.)

Read more less

Wide 2 7/32" (vintage) string spacing. Fits Strat Style Guitars with 6 Point Bridges*.(*Also fits 2 point bridge guitars with some drilling)The Rail Tail Tremolo is a full contact, dive-only tremolo designed to retrofit your existing Strat®-style 6-point tremolo with no modifications to your guitar; a clever design merging the feel and reliability of a hardtail bridge with the flexibility of a tremolo system. Computer designed and precision-machined, the Rail Tail achieves maximum performance and stunning appearance without compromising comfort or feel. Its unique features allow for adjustability to fit a variety of guitar bodies and for an easy DIY installation.Unlike the original tremolo design that rocks on a bevel located under the screw heads, the Rail Tail tremolo plate rotates around a precision rail that is mounted directly to the guitar body. The plate cradles the entire rail with precision as if they were one unit improving sound quality and tuning stability. This union also creates a greater breakpoint allowing open strings to maintain pitch when bending another, much like a hardtail. The tremolo plate consists of slotted string block mounting holes not only for accommodating installation but also allowing the string block to be positioned forward for greater rotational range. This means diving up to 15 degrees more than conventional tremolo bridges. An advanced string block also consists of game-changing features: Mid-positioned tapered string holes assist in true string saddle contact. Working in alliance with the rail and string block are the roller fitted string saddles. This entire assembly provides ultimate vibrational energy transfer from the strings to the guitar body resulting in better overall sustain and tonal qualities. Available in narrow (modern, 2-1/16") and wide (vintage, (2-7/32") models in Chrome, Black, Gold, Nickel and Black Nickel finishes. Please note: The Rail mounting holes are universal meaning that a narrow spaced Rail Tail will fit onto a wide spaced guitar body and vice versa. (For optimum performance, playing experience and reliability, it's highly recommend that the guitar this unit is being installed on, is equipped with locking tuners and a quality nut.)

Read more less

Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever.  *NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed. *Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups. *Locking Nut not included.

Read more less

Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever.  *NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed. *Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups. *Locking Nut not included.

Read more less

Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. *NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed. *Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups. *Locking Nut not included.

Read more less

Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. *NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed. *Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups. *Locking Nut not included.

Read more less

Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. *NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed. *Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups. *Locking Nut not included.

Read more less

Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. *NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed. *Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups. *Locking Nut not included.

Read more less

Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. *NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed. *Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups. *Locking Nut not included.

Read more less

Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. *NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed. *Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups. *Locking Nut not included.

Read more less

The original Original is back! This faithful reissue retains all of the specs of the tremolo that put Floyd Rose on the map. Made from hardened steel, this tremolo kit includes the vintage style screw-in arm.The kit contains the bridge, springs & claw, wood mounting screws, and all hardware necessary for installation.

Read more less

Taken from the original design specs of 1984, Floyd Rose has put together the "1984" tremolo system that recaptures the vibe and excitement from that era. The "1984" system is a true-to-the-original reissue that features brass fine tuners, old style housing and locked in swing arm, bridge mounting wood screws, and a fat solid brass block for incredible tone and sustain. Available in a variety of nut sizes that will fit practically any electric guitar, the tremolo kit contains the bridge, springs & claw, mounting studs, wood screws, and all hardware necessary for installation.

Read more less

Taken from the original design specs of 1984, Floyd Rose has put together the "1984" tremolo system that recaptures the vibe and excitement from that era. The "1984" system is a true-to-the-original reissue that features brass fine tuners, old style housing and locked in swing arm, bridge mounting wood screws, and a fat solid brass block for incredible tone and sustain. Available in a variety of nut sizes that will fit practically any electric guitar, the tremolo kit contains the bridge, springs & claw, mounting studs, wood screws, and all hardware necessary for installation.

Read more less

Used by more professionals throughout the world than any other. No copy can duplicate the double-locking design of the Floyd Rose Tremolo System that allows you to lock your guitar in tune at the nut and at the bridge. The Floyd Rose Tremolo System is engineered like no other tremolo system. Its high quality steel parts are manufactured to exacting specifications to accommodate your 7-String guitar. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

Used by more professionals throughout the world than any other. No copy can duplicate the double-locking design of the Floyd Rose Tremolo System that allows you to lock your guitar in tune at the nut and at the bridge. The Floyd Rose Tremolo System is engineered like no other tremolo system. Its high quality steel parts are manufactured to exacting specifications to accommodate your 7-String guitar. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

Used by more professionals throughout the world than any other. No copy can duplicate the double-locking design of the Floyd Rose Tremolo System that allows you to lock your guitar in tune at the nut and at the bridge. The Floyd Rose Tremolo System is engineered like no other tremolo system. Its high quality steel parts are precision-made in Germany to exacting specifications, and it's available in a variety of nut sizes that will fit practically any electric guitar. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

Used by more professionals throughout the world than any other. No copy can duplicate the double-locking design of the Floyd Rose Tremolo System that allows you to lock your guitar in tune at the nut and at the bridge. The Floyd Rose Tremolo System is engineered like no other tremolo system. Its high quality steel parts are precision-made in Germany to exacting specifications, and it's available in a variety of nut sizes that will fit practically any electric guitar. The tremolo kit contains the bridge, locking nut, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

Used by more professionals throughout the world than any other. No copy can duplicate the double-locking design of the Floyd Rose Tremolo System that allows you to lock your guitar in tune at the nut and at the bridge. The Floyd Rose Tremolo System is engineered like no other tremolo system. Its high quality steel parts are precision-made in Germany to exacting specifications, and it's available in a variety of nut sizes that will fit practically any electric guitar. The tremolo kit contains the bridge, locking nut, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

Used by more professionals throughout the world than any other. No copy can duplicate the double-locking design of the Floyd Rose Tremolo System that allows you to lock your guitar in tune at the nut and at the bridge. The Floyd Rose Tremolo System is engineered like no other tremolo system. Its high quality steel parts are precision-made in Germany to exacting specifications, and it's available in a variety of nut sizes that will fit practically any electric guitar. The tremolo kit contains the bridge, locking nut, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The Floyd Rose Special is our Authentic version of a licensed Floyd Rose tremolo system manufactured in Korea exclusively for Floyd Rose. The Floyd Rose Special maintains design and features of an Original Floyd Rose, while utilizing zinc alloy saddles in place of steel and a zinc alloy sustain block in place of brass. The design specifications and high quality materials of the Special Series Floyd Rose bridge will hold up to the demands of today's performers. Tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The Floyd Rose Special is our Authentic version of a licensed Floyd Rose tremolo system manufactured in Korea exclusively for Floyd Rose. The Floyd Rose Special 7-String maintains the design and features of an Original 7-String Floyd Rose, while utilizing zinc alloy saddles in place of steel and a zinc alloy sustain block in place of brass. The design specifications and high quality materials of the Special Series Floyd Rose bridge will hold up to the demands of today's performers. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The Floyd Rose Special is our Authentic version of a licensed Floyd Rose tremolo system manufactured in Korea exclusively for Floyd Rose. The Floyd Rose Special 7-String maintains the design and features of an Original 7-String Floyd Rose, while utilizing zinc alloy saddles in place of steel and a zinc alloy sustain block in place of brass. The design specifications and high quality materials of the Special Series Floyd Rose bridge will hold up to the demands of today's performers. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The Floyd Rose Special is our Authentic version of a licensed Floyd Rose tremolo system manufactured in Korea exclusively for Floyd Rose. The Floyd Rose Special 7-String maintains the design and features of an Original 7-String Floyd Rose, while utilizing zinc alloy saddles in place of steel and a zinc alloy sustain block in place of brass. The design specifications and high quality materials of the Special Series Floyd Rose bridge will hold up to the demands of today's performers. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The Floyd Rose Special is our Authentic version of a licensed Floyd Rose tremolo system manufactured in Korea exclusively for Floyd Rose. The Floyd Rose Special maintains design and features of an Original Floyd Rose, while utilizing zinc alloy saddles in place of steel and a zinc alloy sustain block in place of brass. The design specifications and high quality materials of the Special Series Floyd Rose bridge will hold up to the demands of today's performers. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The Floyd Rose Special is our Authentic version of a licensed Floyd Rose tremolo system manufactured in Korea exclusively for Floyd Rose. The Floyd Rose Special maintains design and features of an Original Floyd Rose, while utilizing zinc alloy saddles in place of steel and a zinc alloy sustain block in place of brass. The design specifications and high quality materials of the Special Series Floyd Rose bridge will hold up to the demands of today's performers. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The Floyd Rose Special is our Authentic version of a licensed Floyd Rose tremolo system manufactured in Korea exclusively for Floyd Rose. The Floyd Rose Special maintains design and features of an Original Floyd Rose, while utilizing zinc alloy saddles in place of steel and a zinc alloy sustain block in place of brass. The design specifications and high quality materials of the Special Series Floyd Rose bridge will hold up to the demands of today's performers. The tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

The Floyd Rose Special is our Authentic version of a licensed Floyd Rose tremolo system manufactured in Korea exclusively for Floyd Rose. The Floyd Rose Special maintains design and features of an Original Floyd Rose, while utilizing zinc alloy saddles in place of steel and a zinc alloy sustain block in place of brass. The design specifications and high quality materials of the Special Series Floyd Rose bridge will hold up to the demands of today's performers. Tremolo kit contains the bridge, springs & claw, mounting studs, and all hardware necessary for installation.

Read more less

Chrome - S-Type Vibrato. Chrome. Zinc saddle, 10.5mm string spacing. Complete with screw-in tremolo arm and screws. Traditionally referred to as “tremolos” these units have, technically speaking, been misnamed for over 50 years. At GUITAR TECH, we prefer accuracy. Tremolo is amplitude modulation; Cyclical changes in perceived volume. The pitch change caused by the devices traditionally referred to as tremolos, is actually VIBRATO.

Read more less

Chrome - Zinc Saddle Vibrato. Chrome.Zinc saddle, 10.5mm string spacing.Complete with screw-in tremolo arm and screws. Traditionally referred to as “tremolos” these units have, technically speaking, been misnamed for over 50 years. At GUITAR TECH, we prefer accuracy.Tremolo is amplitude modulation; Cyclical changes in perceived volume. The pitch change caused by the devices traditionally referred to as tremolos, is actually VIBRATO. Hence our use of the term

Read more less

Two pivot screws are considered by some to give a better fulcrum action than the six screw "classic design". If this is your choice then this is the "vintage" bridge for you. This bridge is supplied with pivot posts that utilise inserts to give them the structural stability needed when only two fulcrum posts are used. Adjustable for height, this bridge can be "Floated" above the guitar body for ultra smooth vibrato effects. Push-in vibrato arm, vintage spec bent steel saddles and "stagger drilled" block are all featured on this model.  

Read more less

Features include a stamped steel heat hardened top plate. Solid stainless steel saddles. Push-in arm and Wilkinson design stagger-drilled block for unrivalled tuning stability. A truly ultra modern look with classic values.

Read more less