Officially licensed Guild® by Thalia Pick Puck Collection. Custom inlaid with a Pearl Guild® logo, the patent-pending pick puck is the ultimate guitar pick holder. Stick anywhere that is most convenient for you! Thalia Pick Pucks attach using our GuitarSafe™ Micro-Suction pads which are modelled after a gecko's foot. Pick Pucks do not include the picks shown in photos.Specifications:Fits picks up to 2mm thick.Diameter: 40mm (1.57")Thickness: 5mm (0.2")Guitarsafe™ Micro-Suction PadsThalia's proprietary GuitarSafe™ Micro-Suction Pads are modeled after a Gecko's foot, using suction instead of adhesive to adhere to your guitar.  We tested multiple formulations of micro-suction material before finalizing the formula for our GuitarSafe™ pads. Some formulations were far too aggressive and others not quite aggressive enough. Instead, we wanted it to adhere safely to the guitar's finish but not so aggressively that it could cause damage to delicate finishes. The pad's surface contains thousands of microscopic air pockets that create partial vacuums between the puck and the target surface. It isn’t pressure sensitive and won't leave any residue behind. It can also be used repeatedly without losing its gripping power.  If your Thalia Pick Puck loses some of its bonding power, simply wipe the GuitarSafe™ Micro-Suction pad with a damp cloth to remove the dust and it will work as good as new.  To remove the pick puck, you simply pull up very slowly on one edge to break the suction.

Read more less

Thalia Officially Licensed Taylor Guitars Capos come equipped with our Standard Tension 15” Radius “OctaveTouch” Fret Pad installed for use on Taylor 6 string acoustic models. Included in the package is a High Tension 15” Radius “OctaveTouch” Fret Pad for use on 12 String models. “OctaveTouch” fret pads mimic the elasticity of the human finger.Thalia Capos patented reverse action mechanism allows for easy installation and movement on guitar fingerboards. For enhanced fine tuning, Interchangeable Fret Pads are available to match the specific radius of almost every Guitar on the market.• Limited Lifetime Warranty• Laser Engraved Taylor Logo on the casing

Read more less

Thalia Officially Licensed Taylor Guitars Capos come equipped with our Standard Tension 15” Radius “OctaveTouch” Fret Pad installed for use on Taylor 6 string acoustic models. Included in the package is a High Tension 15” Radius “OctaveTouch” Fret Pad for use on 12 String models. “OctaveTouch” fret pads mimic the elasticity of the human finger.Thalia Capos patented reverse action mechanism allows for easy installation and movement on guitar fingerboards. For enhanced fine tuning, Interchangeable Fret Pads are available to match the specific radius of almost every Guitar on the market.• Limited Lifetime Warranty• Laser Engraved Taylor Logo on the casing

Read more less

Thalia Officially Licensed Taylor Guitars Capos come equipped with our Standard Tension 15” Radius “OctaveTouch” Fret Pad installed for use on Taylor 6 string acoustic models. Included in the package is a High Tension 15” Radius “OctaveTouch” Fret Pad for use on 12 String models. “OctaveTouch” fret pads mimic the elasticity of the human finger.Thalia Capos patented reverse action mechanism allows for easy installation and movement on guitar fingerboards. For enhanced fine tuning, Interchangeable Fret Pads are available to match the specific radius of almost every Guitar on the market. • Limited Lifetime Warranty • Laser Engraved Taylor Logo on the casing

Read more less

Thalia Officially Licensed Taylor Guitars Capos come equipped with our Standard Tension 15” Radius “OctaveTouch” Fret Pad installed for use on Taylor 6 string acoustic models. Included in the package is a High Tension 15” Radius “OctaveTouch” Fret Pad for use on 12 String models. “OctaveTouch” fret pads mimic the elasticity of the human finger.Thalia Capos patented reverse action mechanism allows for easy installation and movement on guitar fingerboards. For enhanced fine tuning, Interchangeable Fret Pads are available to match the specific radius of almost every Guitar on the market.• Limited Lifetime Warranty• Laser Engraved Taylor Logo on the casing

Read more less

Thalia Officially Licensed Taylor Guitars Capos come equipped with our Standard Tension 15” Radius “OctaveTouch” Fret Pad installed for use on Taylor 6 string acoustic models. Included in the package is a High Tension 15” Radius “OctaveTouch” Fret Pad for use on 12 String models. “OctaveTouch” fret pads mimic the elasticity of the human finger.Thalia Capos patented reverse action mechanism allows for easy installation and movement on guitar fingerboards. For enhanced fine tuning, Interchangeable Fret Pads are available to match the specific radius of almost every Guitar on the market.• Limited Lifetime Warranty• Laser Engraved Taylor Logo on the casing

Read more less

Thalia Officially Licensed Taylor Guitars Capos come equipped with our Standard Tension 15” Radius “OctaveTouch” Fret Pad installed for use on Taylor 6 string acoustic models. Included in the package is a High Tension 15” Radius “OctaveTouch” Fret Pad for use on 12 String models. “OctaveTouch” fret pads mimic the elasticity of the human finger.Thalia Capos patented reverse action mechanism allows for easy installation and movement on guitar fingerboards. For enhanced fine tuning, Interchangeable Fret Pads are available to match the specific radius of almost every Guitar on the market.• Limited Lifetime Warranty• Laser Engraved Taylor Logo on the casing

Read more less

Officially licensed Taylor by Thalia Capo Collection. 700 Series Reflections Fingerboard Marker inlayed. Black Chrome. Thalia Capos comes with:• Standard Tension Rubber Fretpad Tuning Kit for 6-string guitars• High Tension Rubber Fretpad Tuning Kit for 12-string guitars• Quickstart Guide• Sticker• Thalia 1.4mm Exotic Wood Guitar Pick

Read more less

Thalia Officially Licensed Taylor Guitars Capos come equipped with our Standard Tension 15” Radius “OctaveTouch” Fret Pad installed for use on Taylor 6 string acoustic models. Included in the package is a High Tension 15” Radius “OctaveTouch” Fret Pad for use on 12 String models. “OctaveTouch” fret pads mimic the elasticity of the human finger.Thalia Capos patented reverse action mechanism allows for easy installation and movement on guitar fingerboards. For enhanced fine tuning, Interchangeable Fret Pads are available to match the specific radius of almost every Guitar on the market.• Limited Lifetime Warranty• Laser Engraved Taylor Logo on the casing

Read more less

Officially licensed Taylor by Thalia Capo Collection. 900 Series Ascension Fingerboard Marker inlayed. Black Chrome. Thalia Capos comes with:• Standard Tension Rubber Fretpad Tuning Kit for 6-string guitars• High Tension Rubber Fretpad Tuning Kit for 12-string guitars• Quickstart Guide• Sticker• Thalia 1.4mm Exotic Wood Guitar Pick

Read more less

Premium picks with iconic designs. Each pick tin contains six picks.

Read more less

The PQP-0010-ST is 6 pack of TUSQ Standard-shaped picks.They come in various gauges: 0.68mm, 0.88mm, and 1.00mm thickness.They also come in various tones: Bright (white color), Warm (vintage cream colour), and Deep (gray color).The type of pick you use affects the tone you create. That's why we created TUSQ picks, the world's first and only pick with a built-in tone. By formulating various composite materials, we created a new class of picks with highly resonant characteristics that produce three distinctive tones: Bright, Warm, and Deep.TUSQ picks have a high stiffness-to-thickness ratio, like real tortoise shells but with a harmonic content, only TUSQ can deliver. Experience a smooth, balanced feel and a clean articulate attack. With TUSQ in your pick, a great tone is in your hands. Now you can choose your gauge, your shape, and now your tone.

Read more less

GraphTech String Saver Acoustic Saddle ~ 7mmLength 71.34mm  //  2.809”Width 3.26mm  //  0.128”Height 11.08mm  //  0.436”

Read more less

ResoMax NV tailpiece is made from our lightweight, high-strength Resomax material that will increase harmonic content and leave your guitar dripping with tone. This is a great option to upgrade or replace the existing tailpiece on any electric guitar that currently has a standard tune-o-matic bridge and tailpiece combo.Resomax tailpieces currently ship with metric posts and bushings. Equipped with AutoLock, this tailpiece magnetically locks the bridge to the body of the guitar without a tool making re-stringing a breeze.

Read more less

The PS-8800-00 is a great option for upgrading the Schaller roller tune-o-matic bridge.These are drop-in replacements making for a quick and easy install.

Read more less

The PS-8615-07 is a great option to upgrade or replace the existing saddles on a 7-string Tune-O-Matic bridge marked SUNG IL BM002, TonePros AVR-II, S.I.C., or Komax.These are drop-in replacements making for a quick and easy install.The image below shows 6 of the 7 saddles set.

Read more less

The PRL-8521 is a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitars that uses a 4 x 3 tuner configuration. Fits many Gibson/Epiphone, PRS-style guitars, and any other guitar with a 4+3 headstock.It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm (13/32")String post diameter: 6mm (0.236")String post length to string hole: 23mm (0.910”)Weight per single machine head: 38g (0.083lbs)Weight per set: 266g (0.581lbs)String diameter up to 72 gaugeIncludes 7 machine heads, mounting screws, and bushingsIncludes complimentary 4 sets of aluminium mounting platesRATIO® patented gear technology 
RATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low B to High E 48:1, 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.

Read more less

RATIO® patented gear technology
RATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low B to High E 48:1, 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm (13/32")String post diameter: 6mm (0.236")String post length to string hole: 23mm (0.910”)Weight per single machine head: 38g (0.083lbs)Weight per set: 266g (0.581lbs)String diameter up to 72 gaugeIncludes 7 machine heads, mounting screws, and bushingsIncludes complimentary 4 sets of aluminium mounting plates

Read more less

The PRL-8521 is a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitars that uses a 4 x 3 tuner configuration. Fits many Gibson/Epiphone, PRS-style guitars, and any other guitar with a 4+3 headstock. It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates [opens in new tab]. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 13/32" (10mm)String post diameter: 0.236" (6mm)String post length to string hole: 0.910” (23mm)Weight per single machine head: 0.083lbs (38g)Weight per set: 0.581lbs (266g)String diameter up to 72 gauge RATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation. From Low B to High E 48:1, 39:1, 24:1, 20:1, 35:1, 20:1, 12:1. We balanced the gear ratios to each string simplifying the tuning process. With RATIO®, a half-turn is a semi-tone! Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string. Includes 7 machine heads, mounting screws, and bushingsIncludes complimentary 4 sets of aluminum mounting plates.

Read more less

The PRN-8441 are right-handed sets of Locking RATIO® Calibrated Machine Heads for acoustic guitar that use 3 per side tuners. It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm  /  13/32"String post diameter: 6mm  /  0.236"String post length to string hole: 23mm  /  0.910”Weight per single machine head: 38g  /  0.083lbsWeight per set of six: 225g  /  0.496lbsString diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminium mounting plates RATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low E to High E 39:1, 24:1, 20:1, 14:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.

Read more less

The PRN-8441 are right-handed sets of Locking RATIO® Calibrated Machine Heads for acoustic guitar that use 3 per side tuners. It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm  /  13/32"String post diameter: 6mm  /  0.236"String post length to string hole: 23mm  /  0.910”Weight per single machine head: 38g  /  0.083lbsWeight per set of six: 225g  /  0.496lbsString diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminium mounting plates RATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low E to High E 39:1, 24:1, 20:1, 14:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.

Read more less

The PRL-8421-LB0 is a left-handed set of Locking RATIO® Calibrated Machine Heads for a Music Man, or other 4 x 2 style headstock.It has a mini contemporary button.It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm (13/32")String post diameter: 6mm (0.236")String post length to string hole: 23mm (0.910”)Weight per single machine head: 38g (0.083lbs)Weight per set: 225g (0.496lbs)String diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminium mounting platesWeight per set of six: 225g (0.496lbs)String diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminium mounting plates RATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.

Read more less

The PRL-8421 is a right-handed set of Locking RATIO® Calibrated Machine Heads for a Music Man, or other 4 + 2 style headstock.It has a mini contemporary button.It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm  /  13/32")String post diameter: 6mm  /  0.236"String post length to string hole: 23mm  /  0.910”Weight per single machine head: 38g  /  0.083lbsWeight per set: 225g  /  0.496lbs  String diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminium mounting plates RATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.

Read more less

The PRL-8421 is a right-handed set of Locking RATIO® Calibrated Machine Heads for a Music Man, or other 4 x 2 style headstock.It has a mini contemporary button.It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm  /  13/32"String post diameter: 6mm  /  0.236"String post length to string hole: 23mm  /  0.910”Weight per single machine head: 38g  /  0.083lbsWeight per set: 225g  /  0.496lbsString diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminium mounting platesRATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.

Read more less

The PRL-8421 is a right-handed set of Locking RATIO® Calibrated Machine Heads for a Music Man, or other 4 x 2 style headstock.It has a mini contemporary button.It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm (13/32")String post diameter: 6mm (0.236")String post length to string hole: 23mm (0.910”)Weight per single machine head: 38g (0.083lbs)Weight per set: 225g (0.496lbs)String diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminium mounting plates RATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.

Read more less

The PRN-8411 and PRN-8441 are right-handed sets of Locking RATIO® Calibrated Machine Heads for acoustic guitar that use 3 per side tuners. It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates [opens in new tab]. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 13/32" (10mm)String post diameter: 0.236" (6mm)String post length to string hole: 0.910” (23mm)Weight per single machine head: 0.083lbs (38g)Weight per set of six: 0.496lbs (225g)String diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminum mounting plates RATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low E to High E 39:1, 24:1, 20:1, 14:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string. It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates.4 different sets of InvisoMatch mounting plates in brushed aluminium are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 10mm  /  13/32"String post diameter: 6mm  /  0.236"String post length to string hole: 23mm  /  0.910”Weight per single machine head: 38g  /  0.083lbWeight per set of six: 225g  /  0.496lbsString diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminium mounting plates

Read more less

The PRN-8411 and PRN-8441 are right-handed sets of Locking RATIO® Calibrated Machine Heads for acoustic guitar that use 3 per side tuners. It has a two-pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. Gear ratio: unique for each string position - one turn-one tonePeg holes diameter required: 13/32" (10mm)String post diameter: 0.236" (6mm)String post length to string hole: 0.910” (23mm)Weight per single machine head: 0.083lbs (38g)Weight per set of six: 0.496lbs (225g)String diameter up to 72 gaugeIncludes 6 machine heads, mounting screws and bushingsIncludes complimentary 4 sets of aluminum mounting plates RATIO® patented gear technologyRATIO® - Calibrated Machine Heads incorporate different string gauges into the tuning equation.From Low E to High E 39:1, 24:1, 20:1, 14:1, 20:1, 12:1.We balanced the gear ratios to each string simplifying the tuning process.With RATIO®, a half-turn is a semi-tone!Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.

Read more less

D'Andrea 100th Anniversary Pick Tin containing 14 assorted picks.

Read more less

2.5” Wide Guitar Straps. Adjustable length from 39” to 58”.Stand out on stage with Perri’s new Spot Lights collection of guitar straps. Featuring iridescent, light reflecting characteristics that will capture the attention of your audience.

Read more less

These Official Licensing Pink Floyd The Wall Direct To Leather (DTL) guitar straps are 2.5 inch wide with an adjustable length of 52 to 59 inches. Perri's use the latest technology to print directly on to leather, producing colourful, clear, hi-resolution graphics, super rich in colour that are smooth, durable and will not peel or crack. Perri's DTL straps are also longer than the average guitar strap.

Read more less